TENS unit - Profile TENS Technical Details

Treats two pain areas.

Output Intensity:

0-100mA (500 ohm load)adjustable on level 0-20

Frequency (Pulse rate):

1-200Hz - 50 selectable frequencies

Pulse Width:

10 selectable settings, 25, 50, 75, 100, 125, 150, 175, 200, 225 & 250µs

Waveform

Symmetrical bi-phasic rectangular

Output:

Constant current

Modes:

5 selectable modes:

Constant
Burst I - Fixed 2 burst per second. Each burst consists of 7 pulses. Pulse width adjustable.
Burst II - Fixed 1 burst per 2 seconds. Each burst consists of 80 pulses. Pulse width and frequency are adjustable.
Width Modulation - Pulse width modulates between 25-250µs, ramp up for 8 seconds and ramp down for 8 seconds. Frequency is adjustable.
Rate Modulation - Frequency modulates decreasing from 100Hz to 20Hz in a period of 8 seconds. The frequency then increases from 20Hz to 100Hz in the next 8 seconds. The pattern is then repeated.

Timer:

7 selectable settings:
a. continuous b. 10 minutes c. 15 minutes d. 20 minutes e. 30 minutes f. 45 minutes g. 60 minutes

Memory:

Saves last mode attempt in memory i.e. the next time the unit is used it will start again at the same setting as before. This memory is erased when batteries are changed.

Mode Change:

When the mode is changed, the intensity level will drop to back to zero. It will then gradually increase to the level set by the user.

Display:

In both modulation modes, output changes are visible on display.

Load detector:

If an electrode should accidentally detach itself from the body or the leadwire, the intensity will drop to zero.

Automatic Shutdown:

If intensity levels are at 0 on both channels and if the unit has not been in use for five minutes, it will shut down automatically.

Professional Function 1 - Permanent time used memory:

Memorizes up to 99 hours used time. Display appears in hours and minutes.

Professional Function 2 - Number of times used:

Provided the unit is in use for more than 5 minutes with the intensity activated, the unit will memorize the number of times the unit is used.

Professional Function 3 - Patient Lock/unlock:

Option to lock and unlock device settings.

Power Source:

2 x 1.5v AA batteries (Type LR6)

Battery Life:

100 hours approx.

Low battery indicator

A flashing symbol indicates low battery.

Weight:

100 grams

Size:

10.5cm x 6.5cm x 2.75cm
(4 1/8" x 2 9/16" x 1 1/8")

Output Jack Size:

CE Touchproof

Attached Belt Clip.

Supplied with:

Soft Carrying Pouch
Leads
4 Self adhesive electrodes
Battery
Instructions

Also supplied for FREE:

Dr Gordon Gadsby's book, "An easy guide to TENS pain relief."

Profile TENS Technical Data
Treats two pain areas.
Output Intensity:	0-100mA (500 ohm load)adjustable on level 0-20
Frequency (Pulse rate):	1-200Hz - 50 selectable frequencies
Pulse Width:	10 selectable settings, 25, 50, 75, 100, 125, 150, 175, 200, 225 & 250µs
Waveform	Symmetrical bi-phasic rectangular
Output:	Constant current
Modes:	5 selectable modes: Constant Burst I - Fixed 2 burst per second. Each burst consists of 7 pulses. Pulse width adjustable. Burst II - Fixed 1 burst per 2 seconds. Each burst consists of 80 pulses. Pulse width and frequency are adjustable. Width Modulation - Pulse width modulates between 25-250µs, ramp up for 8 seconds and ramp down for 8 seconds. Frequency is adjustable. Rate Modulation - Frequency modulates decreasing from 100Hz to 20Hz in a period of 8 seconds. The frequency then increases from 20Hz to 100Hz in the next 8 seconds. The pattern is then repeated.
Timer:	7 selectable settings: a. continuous b. 10 minutes c. 15 minutes d. 20 minutes e. 30 minutes f. 45 minutes g. 60 minutes
Memory:	Saves last mode attempt in memory i.e. the next time the unit is used it will start again at the same setting as before. This memory is erased when batteries are changed.
Mode Change:	When the mode is changed, the intensity level will drop to back to zero. It will then gradually increase to the level set by the user.
Display:	In both modulation modes, output changes are visible on display.
Load detector:	If an electrode should accidentally detach itself from the body or the leadwire, the intensity will drop to zero.
Automatic Shutdown:	If intensity levels are at 0 on both channels and if the unit has not been in use for five minutes, it will shut down automatically.
Professional Function 1 - Permanent time used memory:	Memorizes up to 99 hours used time. Display appears in hours and minutes.
Professional Function 2 - Number of times used:	Provided the unit is in use for more than 5 minutes with the intensity activated, the unit will memorize the number of times the unit is used.
Professional Function 3 - Patient Lock/unlock:	Option to lock and unlock device settings.
Power Source:	2 x 1.5v AA batteries (Type LR6)
Battery Life:	100 hours approx.
Low battery indicator	A flashing symbol indicates low battery.
Weight:	100 grams
Size:	10.5cm x 6.5cm x 2.75cm (4 1/8" x 2 9/16" x 1 1/8")
Output Jack Size:	CE Touchproof
Attached Belt Clip.
Supplied with:	Soft Carrying Pouch Leads 4 Self adhesive electrodes Battery Instructions
Also supplied for FREE:	Dr Gordon Gadsby's book, "An easy guide to TENS pain relief."

Customers living outside of the European Union are not liable to pay tax on Body Clock items. Make sure that you tick the VAT exemption box when you fill in your account details. US customers may find it easier to order in dollars $ via our US site www.bodyclock.net. If you live inside the EU and your condition is chronic you are entitled to VAT exemption. Copy and sign this VAT Declaration and send it us to us by email and will process it with your order.
© 1998-2006 Body Clock Health Care Limited. All Rights Reserved.

Profile TENS Technical Data